Paper covered combination wire is an important material for manufacturing transformer.
Mainly used for the winding of power transformers, reactors, and distribution transformers.
Conductor sizes of Paper-covered wire :
Recommended sizes for flat conductors: |
Thickness 0.80-12.00mm Width 3.00-25.00mm Width-thickness ratio ≤20 Maximum cross-section 200mm2 |
Recommended sizes for round conductors: | Diameter 2.00-5.00mm |
Conductor sizes of paper-covered enamelled wire and enamelled combination wire :
Recommended sizes for flat conductors: |
Thickness 1.00-3.00mm Width 5.00-18.00mm |
Recommended sizes for round conductors: | Diameter 2.00-5.00mm |
Conductor sizes of bare wire, paper-covered and film-covered combination wire :
Recommended sizes of conductor : |
Thickness 1.00-6.00mm Width 4.00-20.00mm Width-thickness ratio ≤20 Maximum cross-section 150mm2 |
Conductor sizes of Paper-covered wire:
Recommended sizes for flat conductors:
Thickness 0.80-12.00mm,Width 3.00-25.00mm,Width-thickness ratio ≤20,Maximum cross-section 200mm2
Recommended sizes for round conductors:
Diameter 2.00-5.00mm
Conductor sizes of paper-covered enamelled wire and enamelled combination wire :
Recommended sizes for flat conductors:
Thickness 1.00-3.00mm,Width 5.00-18.00mm
Recommended sizes for round conductors:
Diameter 2.00-5.00mm
Conductor sizes of bare wire, paper-covered and film-covered combination wire :
Recommended sizes of conductor :
Thickness 1.00-6.00mm,Width 4.00-20.00mm,Width-thickness ratio ≤20,Maximum cross-section 150mm2
Conductor material:
• High- quality oxygen-free copper rods with an oxygen content of less than 20ppm. The conductivity exceeds 100% after annealing.
Recommended non-proportional extension strength (Rp0.2) for semi-hard copper conductors is as follows:
C1 Rp0.2 (>100-180) N/mm2 When Rp0.2 is less than 200 N/mm2, the resistivity is less than 1/58 Ωmm2/m
C2 Rp0.2 (>180-220) N/mm2 When Rp0.2 is greater than 200 N/mm2, the resistivity is less than 1/57.5 Ω.mm2/m
C3 Rp0.2 (>220-260) N/mm2
•High-quality aluminum electrical rods, with a conductivity exceeding 62% after annealing
Product Varieties:
•Paper covered wire
•Enamelled paper covered wire
• Bare flat wire combination conductor
• Paper covered wire combination conductor
• Enameled wire combination conductor
• Film-covered wire combination conductor
The above products can be produced according to the standards provided by the user.
Winding insulation materials:
• Power cable paper
• High elongation fiber paper
• High density insulation paper
• Aromatic polyamide paper (Nomex)
• Heat-resistant insulation paper
• PET film
Users can specify the brand, model, and specifications of insulation material